Silent mode and master password

A master password you type, or a key your operating system keeps for this computer: what each mode does, how to switch, and what happens when a vault is locked or reset.

Applies to
Edgely Console, Edgely Database Manager
Updated

Edgely Console and Edgely Database Manager keep your passwords, SSH keys and tokens in an encrypted vault on your computer. The vault opens either with a master password you type, or in silent mode, with a key the app keeps in your operating system's keychain. This page compares the two and covers first launch, switching, unlocking, locking, resetting, where the silent key is kept, and what to do when the vault will not open.

Checked on 2026-11-02 against the code of Edgely Console 1.1.0 and Edgely Database Manager 1.2.0; the Change Password card on 2026-11-07 against Edgely Console 1.2.0, on Downloads; Console's unlock dialogs and its locked silent vault's card on 2026-11-08 against Edgely Console 1.3.0.

The two modes

What differsMaster passwordSilent mode (device-only)
What opens the vaultA password you chooseA random 256-bit key kept in your account's keychain
At launchThe unlock page asks for the passwordThe vault opens with no prompt
The vault file on another computerOpens with the same passwordThe file alone opens nowhere else: the key is in this computer's keychain
Auto-lockAvailable, on by defaultOff
Biometric unlock and Remember This DeviceAvailableOff
Change Master PasswordAvailableHidden: there is no password
LockAvailableIn Console only

Both modes encrypt the vault file, credentials.vault, with AES-256-GCM under a key derived with Argon2id (64 MiB of memory, 3 passes, 4 lanes, a random 32-byte salt) from the master password or from the silent key. Neither ever leaves this computer, and there is no recovery key: a forgotten password, or a keychain item that is gone, loses the credentials, and only an export, or a backup taken under a password you remember, brings them back. (With Remember This Device or biometric unlock on, the app keeps the master password in the keychain of this computer.)

Biometric unlock (Touch ID on macOS, Windows Hello on Windows) works with a master-password vault only, and is not offered on Linux.

Silent mode suits a computer only you sign in to: anyone who can open your session can open the vault. Choose a master password if you share the computer, want the vault to lock while you are away, or want the file to open elsewhere.

Choosing at first launch

The last step of the first-launch wizard sets up the vault.

  1. Where the keychain answers, the step opens on Unlocked by this device. Click Finish Setup: the app creates a key (or reuses the one already in the keychain), stores it there and opens the vault.
  2. For a master password, click Use a master password instead, type it twice and click Finish Setup. Use this device only, no password goes back.

A new master password needs at least 12 characters in both apps: at first launch, with Set master password, and with Change Master Password in Settings > Vault, which Console's Change Password card in its Vault Manager also opens (since Console 1.2.0; in 1.1.0 that card did not check the length). A vault made earlier with a shorter password still opens with it.

Where no keychain can be reached, the step opens on the master password and says why the other choice is missing: Silent mode unavailable in Console, Device-only vault unavailable in Database Manager.

On Linux with a locked keyring, Console opens on the master password and offers the device-only choice below it, warning that the keyring will ask for its password. If the keychain refuses the key at Finish Setup, either app switches the step to the master password.

When a vault already exists (a reinstall that kept the app's data), the step reads Unlock Your Vault; a silent vault opens with its key without asking.

Switching later

In Settings > Vault, the Vault Mode section shows while the vault is unlocked, and while a silent vault is locked.

  • To silent mode: click Switch to silent mode, type your Current Password and confirm. Biometric unlock and Remember This Device are turned off, and the Unlock Methods and Security sections (and Startup in Console) disappear.
  • To a master password: click Set master password, type the New Password twice (at least 12 characters) and confirm. Auto-lock comes back with the settings it had.

Your credentials are kept: the app re-encrypts the whole vault file under the new key and a new salt, in a temporary file it then swaps in, so a failed switch leaves the vault as it was. Connections keep their credentials.

No switch deletes the silent key. After a switch to a master password it stays in the keychain, as the dialog says, and a later switch back reuses it, so backups taken in silent mode still open. A switch to a master password therefore protects the vault from then on, not those backups: if others use this computer, delete the backups folder in the app's data folder and the app's vault key item (see Where the silent key lives, below) after the switch.

Where the keychain cannot be reached, the row reads Silent mode unavailable with the reason, and Switch to silent mode is disabled. If the keychain refuses the key during a switch, the switch fails with a message and the vault keeps its master password.

Unlocking

With a master password, the app opens on Unlock Vault at launch, unless Remember This Device is on (or, in Console, Require Master Password at Startup is off). Type the password in Master Password and click Unlock. On this page, wrong passwords are counted, even across restarts of the app:

Wrong passwordWait before the next try
1st and 2ndNone
3rd5 seconds
4th30 seconds
5th2 minutes
6th5 minutes
7th and later15 minutes each

The page counts down with Too many attempts. Try again in 30s. A successful unlock clears the count, and so does an hour with no wrong password once the last wait is over.

After enough wrong passwords a reset link shows: Forgot Password? Reset Vault in Console, Forgot your password? in Database Manager. How many depends on where the password is asked; a feature that needs the vault during a session asks in an unlock dialog.

Where the password is askedEdgely ConsoleEdgely Database Manager
The unlock page at launchLink after 5, with the waits aboveLink after 5, with the waits above
An unlock dialog during a sessionLink after 5, with the waits, counted with the unlock page (1.2.0 and earlier: counted per dialog, with no wait)Link after 5, with the waits, counted with the unlock page
The wizard's Unlock Your VaultLink after 5, with the waits, counted with the unlock page (1.2.0 and earlier: with no wait)Link after 3, with no wait

A silent vault is opened with its key before the home page shows. When the keychain does not answer, it stays locked and a red banner offers Retry (see Common problems, below).

Locking and auto-lock

Lock, under Vault Status in Settings > Vault, locks the vault at once; quitting the app does too. Open sessions keep running; the next action that needs a credential asks for the master password.

Auto-lock applies to master-password vaults. In Settings > Vault > Security, Auto-Lock Vault is on by default and Auto-Lock Timeout goes from 1 to 60 minutes (15 by default). When it fires the app says Vault auto-locked due to inactivity. What counts as activity differs:

  • Console: clicks, drags and typing in the window.
  • Database Manager: clicks, drags, mouse-wheel scrolling and typing.

Moving the pointer without pressing a button does not count.

On any lock, Clear Clipboard on Lock (in the Clipboard section, on by default) empties the clipboard; Database Manager empties it only if it still holds what the app copied.

In silent mode there is no auto-lock. Console still offers Lock: the vault opens again from the keychain, with no prompt, the next time it needs a credential, with Unlock under Vault Status (the card reads Opens from this device's keychain when needed; in 1.2.0 and earlier it asks for a master password, but none is needed), or at the next launch. Database Manager offers no Lock in silent mode, since the keychain would open the vault again for anyone using the session.

Where the silent key lives

  • macOS: an item in your login keychain, named Edgely Console vault key or Edgely Database Manager vault key in Keychain Access.
  • Windows: a generic credential in Windows Credential Manager, under your Windows account, named EDGELY_CONSOLE.io.edgely.vault.silent_key or EDGELY_DATABASE_MANAGER.io.edgely.vault.silent_key.
  • Linux: an item in your session's Secret Service (GNOME Keyring, KWallet or KeePassXC, for example), named as on macOS.

Each app has its own key: Console and Database Manager never share one, and resetting one app's vault never touches the other's.

A Linux session with no Secret Service (a server without a desktop, some WSL sessions) gets no silent mode: the app never keeps the key anywhere a restart would empty. Start a Secret Service and restart the app to be offered the choice.

Resetting the vault

A reset is the way out when the master password is lost and no backup opens.

  1. Open the Reset Vault dialog from Settings > Vault > Vault Actions > Delete Vault (Delete), the Delete Vault card of Console's Vault Manager, or a reset link after wrong passwords. All open the same dialog.
  2. Type RESET and click Reset Vault.
A reset deletesA reset keeps
The vault file, so every password, SSH key and token in itYour connections, groups and settings
The credential link on every connectionThe app's automatic backups, in the backups folder of its data folder
Biometric unlock and Remember This DeviceThe silent key in the keychain

Database Manager's Set master password dialog says a reset deletes the key: it does not. A new device-only vault reuses the key that was kept, so backups taken in silent mode still open. To create it:

  • Console: the Create Your Vault page (after a reset from the unlock page, and at the next launch after any reset) offers Use this device only, no password.
  • Database Manager: at the next launch, create the vault with a master password on Create Your Vault, then click Switch to silent mode in Settings > Vault.

At the next launch both apps also show Restore the copy of followed by a date, above the form: it brings back the vault you reset. A copy sealed by a forgotten password still does not open; one taken in silent mode opens again with the kept key. Ignore it to start with an empty vault.

Before giving a computer away, also delete the backups folder and the app's vault key item from the keychain.

Moving to a new computer

A silent vault cannot move. Export the credentials with Settings > Vault > Export Vault, into a file protected by a password you choose, and import it on the new computer: see Encrypted import and export. Sync never carries credentials or the vault key: see What sync carries.

Common problems

What you seeWhat to do
A silent vault asks for a master passwordThe app found no key in the keychain: the system was reinstalled, the keychain was reset, or the vault file was copied from another computer or another account. Before you reset, check that you are in the same account with the same keychain (on Linux, the same Secret Service, unlocked). If the key is really gone, the vault cannot be opened: reset it and import an export
The system keychain did not answer, so your vault is still locked. (Console) or Edgely couldn't open your vault: the system keychain did not hand over its key. (Database Manager)The keychain is locked or its prompt was dismissed: unlock it (on Linux, the login keyring) and click Retry. Do not reset: the key is probably still there
macOS asks whether the app may use its vault key itemIt can happen after an update or a reinstall. Type your login password and click Always Allow; Deny leaves the vault locked
The master password is forgottenNothing can recover it. Try an automatic backup taken under a password you remember, else reset the vault and import an export if you have one

Something missing or wrong?

Documentation gaps are bugs. Tell us which page you were reading and what you expected to find.

Send feedback →

Product names, logos and brands mentioned on this page are the property of their respective owners. They are used for identification and comparison only, and their use does not imply any affiliation with or endorsement by them.